Building/Steel Reinforcing Products

AUSREO- products Steel reinforcing

Steel Reinforcing Slab Mesh

This general purpose mesh is used for reinforcing, concrete, such as floor slabs, both residential and industrial applications. Ute mesh or DIY is a High quality mesh produced in a handy 2m x 4m sheet, perfect for smaller jobs like driveways.

SQUAIE SLAB MESH 200×200 : Grade D500L Ribbed Reinforcement Wire

  • SL72 6m X 2.4m
  • SL82 6m X 2.4m
  • SL92 6m x 2.4m Special Order
  • SL72 UTE 4m x 2m
  • SL82 UTE 4m x 2m


Trench Mesh

Use: Trench Mesh is designed as a long narrow reinforcement Sheet. For a specific use in trench footings. Related products Foundation Frames, ligatures/fitments, bar chairs, tie wire.

TRENCH MESH: Grade D500L Ribbed Reinforcement Wire

  • L8MM   6M LENGTH   (200MM 3 BAR) (300MM 4BAR) (400MM 5 BAR) (500MM 6 BAR)
  • L11MM 6M LENGTH   (200MM 3BAR) ( 300MM 4 BAR) (400MM 5BAR) (500MM 6 BAR)
  • L12MM 6M LENGTH   (200MM 3BAR) (300MM 4 BAR) (400MM 5BAR) (500MM 6 BAR)

Steel Bar

Uses: include columns, beams, walls and cages. Both residential and industrial applications.

Back or Galvanized N grade 500

  • N12, 6m length
  • N16, 6m length
  • N20, 6m length
  • Galvanised N12, 6m length
  • Galvanised N16, 6m length

We can cut to length at an addition cost.


Bent Bar

These processed L bars are normally used to tie reinforced masonry or concrete walls to slabs or footings, as designed by the engineer. Footing Bars Z Bar provides a positive connection between the slab and the footing beam reinforcing.

Black or Galvanized

  • Bent Z bar Special order
  • Bent L bar Special order

Give us call for ETA and price


Trench mesh ligatures/sturrpus R10

use:Ligatures/ Fitments are used with trench mesh in making a cage in trench footings. Creating a rigid cage.

Bundles of 10 or single

  • Sturrup 200×200
  • Sturrup 200×250
  • Sturrup 200×300
  • Sturrup 200×350
  • Sturrup 200×400
  • Sturrup 200×450
  • Sturrup 300×250
  • Sturrup 300×300
  • Sturrup 300×350
  • Sturrup 300×400
  • Sturrup 300×450
  • Sturrup 400×250
  • Sturrup 400×350
  • Sturrup 400×400
  • Sturrup 400×450


Foundation Frames- Trench mesh supports

Foundation Frames are lightweight, simple fast system to support mesh in concrete footings. Easy to assemble, with clips that tie the top and bottom mesh together with dual heights.  The bottom layer of the mesh is supported 50mm off the ground. The frames clip onto the main longitudinal wire at the cross bar at 900mm intervals, creating a rigid cage. Assembled outside the trench.

3 easy to identify sizes, 150/200mm, 250/300mm, 350/400mm and can be used on 8mm, 11mm and 12mm mesh

  • 150/200mm, bag of 25
  • 250/300mm, bag of 25
  • 350/400mm bag of 50

Plastic Bar Chairs

Use: When supporting reinforcing mesh, Strong and stable, Quick to set & covers dual heights. They have no rust issues. Slab on Ground construction, Swimming Pools, pod slab.

Bags Of 100 Or Single

  • 25/40 MM bag 100 or 25/40 mm single
  • 50/65MM bag 100 clip fast plastic or 50/65mm single clip fast plastic
  • 75/90MM bag 100 or 75/90mm single
  • 85/100mm bag 100 or 85/100mm single

Metal Bar Chairs

Metal Bar Chairs- plastic tipped, are primarily used for setting reinforcing mesh into the correct poison, in concrete slabs, beams, vertical walls, suspended slab and slab on ground on metal bases.

BAG ONLY

25mm (Bag 100), 30mm  (Bag 100), 40mm (Bag 100), 50mm (Bag 100), 65mm (Bag 100), 75mm (bag 100), 90mm (Bag100), 100mm (Bag 100), 110mm (Bag 50), 120mm (bag 50), 130mm (bag 50), 140mm (bag 50), 150mm (bag 50), 160mm (bag 50), 170mm (bag 50), 180mm (bag 50), 200mm (bag 50), 250mm (bag 50), 300mm (bag 50)


Metal Bases (or pie plates)

For use with metal bar chairs, Slab on ground, metal base are used to minimise penetration of sub bases and maximise stability.

  • Single
  • Bag of 100


Tie Wire Belt pack (Black)

Annealed tie wire is used throughout the construction and manufacturing industries. Common uses include bundling reo, lengths of steel, and mesh to a package.

  • Roll- wire 1.57mm 95m 1.42kg

Tie Wire 5kg rolls (Black)

Annealed tie wire is used throughout the construction and manufacturing industries. Common uses include bundling reo, lengths of steel, and mesh.

  • Roll -wire 1.57mm 329m 5kg

Tie wire- Pull Ties or Looped Tie

Annealed tie wire is used throughout the construction and manufacturing industries. Common uses include bundling reo, lengths of steel, and mesh.

Handy pack 200 Ties:

  • Length 110mm
  • Length 150mm

           2000 Ties Roll:

  • Length 110mm
  • Length 150mm  

Foam Joint

Available in non-Adhesive and Self-Adhesive

Non-absorbent and impervious to most liquids Superior compression and recovery properties, vital to ensure a good joint filler. Excellent weather ability and resistance to ultraviolet light deal as a gap filler and bond breaker for floor and wall expansion joints, filling systems for roads, motorways, bridges, walls and automotive applications. Stick Attachment is easily achieved by removing the backing paper and placing the sticky surface to the adjacent material.  Ensure that the top zip of the expansion joint is at the top of the intended concrete pour. If sealant is not required  have the zip facing downwards.

Foam Joint x 25mtr Sticky

  • 50mm x 25mtr STICKY BACK
  • 75mm x 25mtr STICKY BACK
  • 100mm x 25mtr STICKY BACK
  • 150mm x 25mtr STICKY BACK
  • 200mm x 25mtr STICKY BACK

Foam Joint x 25mtr

  • 50mm x 25mtr
  • 75mm x 25mtr
  • 100mm x 25mtr
  • 150mm x 25mtr
  • 200mm x 25mtr

Handipak – Foam Joint x 6Mtr

Non-absorbent and impervious to most liquids, superior compression and recovery properties, vital to ensure a good joint fill. Excellent weather ability and resistance to ultraviolet light, as a gap filler and bond breaker for floor and wall expansion joints, filling systems for roads, motorways, bridges, walls and automotive applications

  • 50mm x 6mtr
  • 75mm x 6mtr
  • 100mm x 6mtr
  • 150mm x 6mtr

Bitumen Impregnated fibreboard, expansion joint filler board

Bituminous EXP joint sock size and length of 2.4m x 9.5mm. Used in concrete pavements and floors, roads, pedestrian areas, driveways, warehouse flooring, be positioned against concrete forms.

Lengths – 2.440mm Thickness approx. 9.5mm

  • 60mm
  • 75mm
  • 100mm
  • 150mm
  • 200mm

Star Pickets (black)

Heavy duty star pickets/star posts with pre drilled holes for fixing Wire, Temporary Fence, Barrier Mesh etc. Suitable for Construction, Fencing and Formwork, access fencing.   Related products safety caps, safety fencing

Available Sizes: 450mm, 600mm, 900mm, 1,350mm, 1,650mm, 1,800mm, 2,400mm


Pier Liners - Trans Vent

Trans vent Pier Liner -Tried and Tested Formula

Better known as “Pier Liners”, Trans vent   lead the way in concrete foundation forming tubes. You can be confident in the ridgidity with 3 corrugations per strip, which are internal making them easy to slip into a drilled, or hand dug hole down to rock or solid anchor base. Trans Vent Pier Liners are easy to cut and modify with any angle grinder fitted with a steel cutting wheel.

Stock Sizes are 4 meters in length

Come in 300mm, 350mm, 400mm, 450mm, 500mm & 600mm. Joiner available


Timber stakes

  • Quality hardwood peg, extra strength for repeated use.
  • Commonly used by concreters to support formwork.
  • Ideal for holding timber edging in landscaping.
  •  Longer below ground life.
  • Tree bracing/stabilizing. Foundation for trees in early growth. Related products duet webbing

Hardwood 50×50 pack of 6:

450mm single, 600mm single & 1,800mm single


Safety – Caps & Bar Grades

Bar Guards and safety caps reduce the chance of cuts and abrasions from exposed reo bar and star pickets fencing and form work

Star Post Triangle Cap

  • Single
  • Box 50

Round Cap for Reo Bar & Star Post

Up to 24mm reo bar

  • Single
  • Box 50

Builders Plastic Rolls

Products meet a minimum requirement of thickness and strength. Polythene film products are recognised for their quality and compliance with both Australian standards (AS/NZS 2870) and the Builders Code of Australia (BCA). AS/NZS 2870 requires that such products meet a minimum requirement of thickness and strength.

Handy rolls 200um Polythene Film

  • 5m x 2m
  • 10m x 2m
  • 20m x 2m

Products major recommended use: as slab underlay (concrete). Appearance: Black Plastics. Width: 2m & 4m (centrefold). Length: 50m Thickness: 0.2mm (200um) High Impact film. STANDARD: AS/NZS 2870. FILM CODE: POLY-B4-HIP

Polythene Film 200um Hi Impact AS/NZS 2870/1996

  • 50m x 2m
  • 50m x 4m

Call Now