Dampcourse

Alcor is used as a damproof course, window and door flashing, valley flashing or ant capping. FEATURES: Impervious to moisture. Easily dressed and formed as it has excellent shape retention. Not affected by lime and cement

Aluminum Dampcourse Alcor 10mm Rolls

GRADES: STANDARD GRADE: .3mm thick aluminium core. For use in domestic and some commercial and industrial applications

• 110mm x 10mtr
• 150mm x 10mtr
• 230mm x 10mtr
• 300mm x 10mtr
• 350mm x 10mtr
• 380mm x 10mtr
• 450mm x 10mtr

Aluminum Dampcourse Alcor 10mm Rolls

• 110mm x 30mtr
• 150mm x 30mtr
• 230mm x 30mtr
• 300mm x 30mtr
• 350mm x 30mtr
• 380mm x 30mtr
• 450mm x 30mtr

Polythene Dampcourse

Concealed Flashing BASE THICKNESS: 0.5mm. EMBOSSED THICKNESS: 0.75mm. LENGTH: 30m Rolls.

N.B. Suitable for Flashing, Waterproofing, Damp Proofing. Not to be used for exposed Flashing. COMPLIES WITH THE REQUIREMENTS OF AUSTRALIAN STANDARDS AS 2904-1986.

Poly Dampcourse 30m Rolls

• 110mm x 30mtr
• 150mm x 30mtr
• 230mm x 30mtr
• 300mm x 30mtr
• 350mm x 30mtr
• 380mm x 30mtr
• 450mm x 30mtr

Malthoid

• Used for waterproofing of flat roofs.
• Used as dampcourse on brick and block walls.
• Malthoid is inert to lime in mortar mixes
• Malthoid is a 2-ply felt material impregnated with bitumen
• Also covered in a fine sand to prevent sticking when rolled.

Vesfelt

• 110mm x 20mtr
• 150mm x 20mtr
• 230mm x 20mtr
• 270mm x 20mtr
• 300mm x 20mtr
• 350mm x 20mtr
• 450mm x 20mtr

Lead Dampcourse and Flashings

Lead is a corrosion resistant material able to withstand many years of exposure to weather. Lead has the softness and ductility to be dressed down and formed on site to fit roof contours without splitting or cracking Lead is a natural metal. It is the most recycled & recovered building material used today. ( minimal waste ) Lead offers the best value in terms of longevity and ecology compared to other products used as substitutes. To accommodate thermal movement, lengths of lead should not exceed 1.5m in length. Where long flashings are required overlapping should occur, see datasheets below.

Lead 15kg x 3mtr

• 110mm x 3mtr
• 150mm x 3mtr
• 230mm x 3mtr
• 300mm x 3mtr
• 350mm x 3mtr
• 450mm x 3mtr

Lead 15kg x 6Mtr

• 110mm x 6mtr
• 150mm x 6mtr
• 230mm x 6mtr
• 300mm x 6mtr
• 350mm x 6mtr
• 450mm x 6mtr

Lead 20kg x 3mtr

• 110mm x 3mtr
• 150mm x 3mtr
• 230mm x 3mtr
• 300mm x 3mtr
• 350mm x 3mtr
• 450mm x 3mtr

Lead 20kg x 6mtr

• 110mm x 6mtr
• 150mm x 6mtr
• 230mm x 6mtr
• 300mm x 6mtr
• 350mm x 6mtr
• 450mm x 6mtr

Wakaflex

Compatible with Most Roofing Materials: Wakaflex can be built into brickwork, and step flashed Non Toxic: As Wakaflex is a lead-free flashing product, there are no potential hazards for installers and no contamination for run-off water.

Black

• 280mm x 5mtr
• 370mm x 5mtr
• 560mm x 5mtr

Brown

• 280mm x 5mtr

Lead Grey

• 280mm x 5mtr
• 370mm x 5mtr
• 560mm x 5mtr

Terracotta

• 280mm x 5mtr
• 370mm x 5mtr
• 560mm x 5mtr

Builders Plastic Rolls

Products meet a minimum requirement of thickness and strength. Polythene film products are recognised for their quality and compliance with both Australian standards (AS/NZS 2870) and the Builders Code of Australia (BCA). AS/NZS 2870 requires that such products meet a minimum requirement of thickness and strength.

Handy rolls 200um Polythene Film

• 5m x 2m
• 10m x 2m
• 20m x 2m

Products major recommended use: as slab underlay (concrete). Appearance: Black Plastics. Width: 2m & 4m (centrefold). Length: 50m Thickness: 0.2mm (200um) High Impact film. STANDARD: AS/NZS 2870. FILM CODE: POLY-B4-HIP

Polythene Film 200um Hi Impact AS/NZS 2870/1996

• 50m x 2m
• 50m x 4m

Foam Joint

Stick Attachment is easily achieved by removing the backing paper and placing the sticky surface to the adjacent material. Ensure that the top zip of the expansion joint is at the top of the intended concrete pour. If sealant is not required, have the zip facing downwards.

Foam Joint x 25mtr sticky

• 50mm x 25mtr STICKY BACK
• 75mm x 25mtr STICKY BACK
• 100mm x 25mtr STICKY BACK
• 150mm x 25mtr STICKY BACK
• 200mm x 25mtr STICKY BACK

Non-absorbent and impervious to most liquids, superior compression and recovery properties, vital to ensure a good joint fill. Excellent weather ability and resistance to ultraviolet light, as a gap filler and bond breaker for floor and wall expansion joints, filling systems for roads, motorways, bridges, walls and automotive applications

Handipak – Foam Joint x 6Mtr

• 50mm x 6mtr
• 75mm x 6mtr
• 100mm x 6mtr
• 150mm x 6mtr

Foam Joint x 25Mtr

• 50mm x 25mtr
• 75mm x 25mtr
• 100mm x 25mtr
• 150mm x 25mtr
• 200mm x 25mtr

Bitumen Impregnated Board

Bituminous EXP joint sock size and length of 2.4m x 9.5mm. Used in concrete pavements and floors, roads, pedestrian areas, driveways, warehouse flooring, be positioned against concrete forms.

Lengths – 2.440mm Thickness approx. 9.5mm

• 60mm
• 75mm
• 100mm
• 150mm
• 200mm