Standard Weepa

Product Code 14-STDW- box 25

Features:

75mm (H) x 10mm (W) x 105mm (D) A weep hole former that creates a perfect weephole when installed by the bricklayer. Suitable for face brick or rendered brick and block. The green mortar protector is removed after installation, leaving a clean and beautiful finish.

Please note: Weep hole spacing and location will be specified on plans by the architect, planner, or engineer in accordance with the Building Code. The Standard Weepa makes compliance simple and  effective. Weep holes become easy for tradesmen and stay clean during construction.  Independent research confirms airflow compliance.

Stainless Steel Weepa

Product Code 19-TSSW- box 10

Features:

Luxury weepa hole former for prestige projects. Made entirely from 316 stainless steel. Installed by the bricklayer during construction. Suitable for use in face brick or rendered brick and block. Compliant by design with all Bushfire Attack Levels (BALs) of AS3959:2018. (Corrosion-resistant steel with holes maximum aperture 2mm) Excludes wide range of pests.

High Performance Bushfire Protection

Product Code 11-HPBW -box 25

Features:

The patented grate in the High Performance Bushfire Weepa is designed so that under extreme heat from bush fires it doesn’t melt. Instead, it chars and retains its structural integrity. The stainless steel mesh is retained in situ protecting the cavity from fire brands and sparks. Mesh specifications: SS316 grade stainless steel woven mesh, wire aperture 0.415mm, wire diameter 0.22mm

The High Performance Bushfire Weepa is suitable for installation in Bushfire Attack Levels BAL-LOW, BAL-A12.5, BAL-A19 as defined in AS3959-2018. 

The High Performance Bushfire Weepa has been tested by BRANZ, an accredited AS1530.8.1:2018 laboratory, to meet BAL-LOW, BAL-A12.5 and BAL-A19.

New Generation Bushfire Weepa

Product Code 23-NGBW box 25

Features:

A weep hole former with a fully stainless steel grate and fire resistant polymer body, designed to protect your home during a bushfire.

When used in masonry construction it is compliant with AS3959:2018 for BAL-LOW, BAL-A12.5, BAL-A19, BAL-A29 and BAL-A40.Suitable for face brick or rendered brick and block.

The purple mortar protector is removed after installation, leaving a clean and beautiful finish. Ensures ventilation and drainage of the cavity to reduce fungal decay and mildew. Excludes a wide range of pests.

Protector Weep Hole Screen

Product Code 21-SSWS

Features:

Excludes mice, bees, European wasps, cockroaches, spiders, snakes and more. 

Can be used as a duo with Termite Protector Weep Hole Screen for ultimate weep hole protection including termite, ant and cockroach deterrence. Tested to ensure adequate airflow and cavity ventilation (Griffith Uni) 

Easy installation with the supplied tool.Made entirely from 316 Stainless steel for a long life without rust, even in coastal areas. Compliant by design with all Bushfire Attack Level (BAL) requirements of AS3959:2018.

Sits securely within the weep hole, without detracting from the external finish and safe from accidental dislodgement.

Termite Protector Weep Hole Screen – New!

Product Code 22-TPWS

Features:

An easy way to deter termites from entering you home through weepholes. The simple tool allows easy application and it can be used in conjunction with the stainless steel Protector Weep Hole Screen for ultimate protection against mice, bees, wasps, cockroaches, spiders, snakes and bushfires.

50mm Stainless Steel Weepa

Special Order: Product Code 20-SSSW

Features:

The pressed stainless steel grate has holes less than 2mm in diameter. This means that embers cannot pass through into the wall cavity and ignite combustible materials. 

By design it is compliant with all Bushfire Attack Level (BAL) requirements of AS3959:2009 including BAL-12.5, BAL-19, BAL-29 and BAL-40 and BAL-FZ.

70mm Bushfire Weepa

Special Order: Product Code 15-NABW

Features:

The patented grate in the 70mm Bushfire Weepa is designed so that under extreme heat from bush fires it doesn’t melt. Instead, it chars and retains its structural integrity. The stainless steel mesh is retained in situ protecting the cavity from fire brands and sparks. Mesh specifications: SS316 grade stainless steel woven mesh, wire aperture 0.415mm, wire diameter 0.22mm

The70mm Bushfire Weepa is suitable for installation in Bushfire Attack Levels BAL-LOW, BAL-A12.5, BAL-A19 as defined in AS3959-2018. The High Performance Bushfire Weepa has been tested by BRANZ, an accredited AS1530.8.1:2018 laboratory, to meet BAL-LOW, BAL-A12.5 and BAL-A19.

70mm Weepa

Special Order: Product Code 13-NAPW

Features:

For use in rendered lightweight panel or kiwi brick. Ensures ventilation and drainage of the cavity reduce fungal decay and mildew. Excludes wide range of pests. The green mortar protector is removed after installation, leaving a clean and beautiful finish.

Please note: Weep hole spacing and location will be specified on plans by the architect, planner, or engineer in accordance with the Building Code. The Standard Weepa makes compliance simple and effective. Weep holes become easy for tradesmen and stay clean during construction. Independent research confirms airflow compliance.

90mm Extension

Special Order: Product Code 17-EXTW

Product Overview:

• Extends the length of all
  Weepas for block work and retaining walls.
• Does not lock on so
  Extension and Weepa decouple when renderer is adjusting Weepa for depth.
• For 140-150mm block work use
  a 70mm Weepa with the Extension.
• For 190-200mm block work use
  a standard length Weepa with the Extension.